Viconics VST5000 (Classic ZigBee) User Guide Uživatelský manuál Strana 2

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 12
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 1
2
VST5000W5000W Wireless Survey Tools User Guide
Index
Product Overview 2
ZigBee Mesh Network Overview 2
Basic Initial Design And
Deployment Consideration 3
Site Survey Overview 5
Knowing and understanding
the 6A / 5H rule of ZigBee
8
6A stands for 6 addresses maximum
per device / node / controller 8
Orphan Nodes 8
5H stands for 5 hops maximum 9
Best practice ZigBee initial network
start-up procedure 10
Disclaimer
11
SUR-A-5000 & SUR-B-5000
Product Overview
The Viconics wireless survey tools are intended to verify
and validate the deployment and use of the Viconics
wireless controllers on a potential job site.
Included in this package you will nd the following items:
• 2xSurveydevices:SUR-A-5000&SUR-B-5000
• 2x120Vacchargerforthetools
Before performing a survey, please insure that
both survey tools are fully charged overnight.
The survey tool will display a numerical percentage
value on the LCD screen which represents the wireless
network ZigBee RSSI dBi value (Receiving Signal Strength
Indicator).
Please note that it is normal for the value to
uctuate slightly (up to 10-20%). The nal
reading value is representative of the median
averaged values displayed.
• Anyvaluefrom10to100%indicatesgoodZigBee
connectivity.
• Anyvaluebelow10%“mayindicatethat
anextraRouterVRP5000W1000Wmayneedto
be installed.
ZigBee Mesh Network Overview
ZigBee is a specication for a suite of high level
communication protocols using small, low-power digital
radios based on the IEEE 802.15.4-2003 standard for
wireless personal area networks (WPANs).
Mesh networking is a type of network where each node
in acts as an independent router. It allows for continuous
connections and reconguration around broken or
blockedpathsby“hopping”andre-meshing”fromnode
to node until the nal destination is reached.
General characteristics of the wireless physical
communication layer are:
• Usesawirelessphysicallayerof2.4GHzwithadata
rates of 250 kbps
• Yieldshighthroughputandlowlatency
• Automatictopologyconguration:star,
peer-to-peer, mesh
• Handshakeprotocolfortransferreliability
• Range:50feet/15Mtypical(upto100feet/30M
based on environment)
Zobrazit stránku 1
1 2 3 4 5 6 7 ... 11 12

Komentáře k této Příručce

Žádné komentáře